Configuration of the Canon 2000D / T7

Battery

The first thing to do is fully charge the battery. Everyone wants to put the battery in and take pictures right away, but you need to fully charge the battery first. By fully charging and then depleting the battery as you use it, usage prolongs battery life. It only takes three or four hours. Then put the battery in the camera at the bottom of the camera. If you look at the battery you will see that there are electrical connectors on one end and there is a Canon logo on the battery so to fit the battery correctly you have the connectors facing the camera and the logo facing you and it will. enters. Like most modern batteries, it only works one way, so if it doesn’t go in very easily, you most likely have it the other way around. When it goes in it will click the clip on the bottom that keeps the battery in and when you want to take the battery out you just undo the clip and it bounces back.

memory card

The second thing to do is put in your memory card. Most professionals tend to use SanDisk memory cards because they offer a lifetime warranty on the card. However, it is worth keeping in mind that they will not replace the contents of the card. So if you have a 16 gigabyte card and it has 10 gigabytes of video and image data on it and then it goes corrupt they will just replace the card. It really is essential to have a place where you can save these images and videos permanently and safely, and that usually means an external hard drive. Like the battery, the card has electrical conductors and has the logo on the front and if you position it this way so that the logo is facing you and goes into the little slot above the battery, you can just slide it

lens placement

The next thing to do is put on the lens. The Canon 2000D or Rebel T7 is an APS-C camera, which means it’s a cropped frame camera. There are two types of 35mm DSLR cameras: full frame or crop frame. The Canon EOS 2000D is a cropped frame camera, which means the sensor is a bit smaller and cheaper, as are the lenses. However, you can still take professional-quality photos and videos. This camera accepts EF-S or EF lenses, but the recommended lens group for the Canon Rebel T7 is the EF-S lens group. When you change your lens, try to keep the camera tilted so that dust and dirt don’t get into it. This is because the sensor inside the camera is very sensitive and if dust and dirt get into it, it will damage the sensor and affect your photos and videos. It is also incredibly difficult to clean. So when you change lenses, try to do it quickly. On the side of the lens you will see a white square and if you look at the mount ring on the Canon T7 you will see a white dot. You just need to match them and turn the lens clockwise until you hear them click. Once it’s clicked, it means it’s fixed on the camera, and because it’s an EF-S lens, it can now communicate with the camera and therefore help with autofocus and autoexposure.

The menus

When you want to access the camera menus, it is very important to make sure that you are in manual mode and the reason is that when you press the menu button, all the menu tabs appear on top. If you were on a different semi-automatic or fully automatic option, when you press the menu options, not all the tabs appear at the top. When you turn on your camera for the first time, the screen will ask you to set the date, time zone, and language. The date and time information will be added to the metadata of each image you take. You can change these details by using the cross keys and pressing set. Once you’ve set the time and date, you can set the date format to either the UK version or the US version. Once you’ve chosen the one you want, press that again and then move on to the time of day. summer and continue with time zone and region once everything is correct you can just hit ok. If you want to come back at any time to change the time, date or language, you will find them in SETTINGS TAB 2.

Format your memory card

If you have a new card or a card you took from an old camera, it’s very important to format it so that the card and camera work together. The way to do it is by pressing the menu button and then go to SETUP TB 1 and here you can see the option to format the card. The important thing to remember here is that when you format the card, you will lose everything, even the pictures and videos you have protected will be deleted. So you need to know that everything on the card has been copied or is something you don’t want before you format your card. But if you’re happy to do that, click OK and it will format the card and prepare it for use with this camera.

The diopter adjuster

The next thing to do is look through the viewfinder and see if what you can see through it looks sharp. If you don’t have 20/20 vision or wear glasses, although the camera’s autofocus makes the image absolutely sharp, when you look through the viewfinder it can appear out of focus. By using that diopter adjuster, which is right next to the eyepiece of the scope, you can change the focus setting to match your eyesight. But remember that if you have the lens on autofocus, the camera will automatically focus the image even if it doesn’t look sharp to you.

monitor brightness

If you find that the brightness of the LCD monitor is too bright or too dark, you can change it by going to SETTINGS TAB 2. Click on the LCD brightness and choose to make it brighter or darker. However, keep in mind that the optimal setting for checking the exposure on the live view screen is level 4.

Auto power off setting

There’s nothing more irritating than the camera turning itself off when you’re still trying to compose an image. While it helps save battery life, it can interrupt your train of thought and slow you down. You can change the time it takes for the camera to turn off by going to SETTINGS TAB 1 and choosing AUTO POWER OFF. Here you will see that you will be able to choose between 30 seconds and 15 minutes and you can completely disable it if you wish. I think setting it to one minute is a good compromise.

ISO settings

The ISO setting manages how sensitive your sensor is to light coming into the camera. For starters, the Canon T7 will be on the auto ISO setting, which is very convenient in most cases. However, you will want to control this at some point, especially since the ISO setting has a direct impact on the quality of your image. It is easy to control the ISO using the cross keys. Press the top one labeled ISO and the ISO options will appear on the LCD screen. As a general rule of thumb, ISO 100 to 400 is suitable for bright or sunny light, 400 to 1600 for cloudy or dusk, and 1600 to 6400 for low light and night shots.

File size and compression

The next thing to consider is the file size and compression ratio. The Canon 2000D will capture a 24 megapixel file and that is a very high quality image. The JPEG compression rate will decide the quality of the image when it is stored on your memory card and also how many images you can save on your card. obviously it is better to choose the best compression rate to make the choice go to SHOOTING TAB 1 and go to the first option which is image quality. I prefer to choose a large file size and the best compression quality.

If you want more information, you may not take a look at our manual, which has been written especially for this camera. In fact, we are giving away a sample of our manual. Contains 2 full course videos including full video on how to shoot movies with the Rebel t7 all you have to do is click the link below and we’ll send it to you right away absolutely free.